Changing your Gotrax scooter from kilometers to miles per hour is simple and only takes a few button presses. This guide walks you through the exact steps for every major Gotrax model, including troubleshooting if the setting doesn’t stick.
Key Takeaways
- Most Gotrax scooters allow unit switching via the display panel. You don’t need apps or tools—just your scooter’s power button and mode button.
- The process varies slightly by model. G1, G2, G3, G4, GXL, and XR series each have unique button sequences—knowing your model is key.
- Always power on the scooter first. The unit change won’t work unless the display is fully active and showing speed or battery info.
- Hold buttons for 3–5 seconds. Quick taps won’t trigger the setting change—timing matters.
- If it doesn’t work, try a reset. Turning the scooter off and on again can clear glitches and allow the setting to apply.
- Check your display after riding. Confirm the change worked by taking a short test ride and watching the speed readout.
- No app required for basic models. Unlike some e-scooters, most Gotrax units don’t need Bluetooth or a smartphone to switch units.
How to Change Gotrax Scooter from Km to Mph
If you’ve recently bought a Gotrax electric scooter or moved to a country that uses miles instead of kilometers, you might be wondering: How do I change my Gotrax scooter from km to mph? The good news is, it’s easier than you think—and you don’t need any special tools, apps, or technical know-how. Whether you ride a Gotrax G1, G2, G3, G4, GXL, or XR model, this complete guide will walk you through the exact steps to switch your speed display from kilometers per hour (km/h) to miles per hour (mph).
In this guide, you’ll learn:
– Why unit conversion matters for safety and usability
– How to identify your Gotrax model
– Step-by-step instructions for every major Gotrax scooter
– Tips to ensure the change sticks
– What to do if the setting doesn’t work
– How to confirm the change was successful
Let’s get started!
Why Change from Km to Mph?
Visual guide about How to Change Gotrax Scooter from Km to Mph
Image source: m.media-amazon.com
Before we dive into the how-to, let’s talk about why this matters. Speed units aren’t just about preference—they affect how you interpret your scooter’s performance and stay safe on the road.
If you’re in the United States, the UK, or another country that uses the imperial system, seeing your speed in mph makes immediate sense. You’ll know instantly whether you’re going 10 mph (a safe cruising speed) or 15 mph (getting into faster territory). But if your scooter displays km/h, those numbers can be confusing. For example, 16 km/h might look fast, but it’s actually just 10 mph—a common speed limit in many neighborhoods.
Using the correct unit helps you:
– Follow local speed regulations
– Ride more confidently
– Avoid accidentally speeding
– Communicate better with other riders or law enforcement
Plus, it just feels more natural when the numbers match what you’re used to. So whether you’re commuting, joyriding, or teaching a teen to ride, switching to mph can make your experience smoother and safer.
Identify Your Gotrax Model
Not all Gotrax scooters are built the same—and that includes how you change settings. Before you start pressing buttons, it’s important to know which model you have. Here’s a quick rundown of the most popular Gotrax scooters and how to tell them apart:
Gotrax G1 (Entry-Level)
– Basic LED display
– Single power button
– No Bluetooth or app connectivity
– Often sold as the “Gotrax Beginner Scooter”
Gotrax G2 and G3
– Slightly upgraded displays
– Two-button interface (power + mode)
– G3 has a slightly larger battery and motor
Gotrax G4
– Modern design with a digital LCD screen
– Two buttons below the display
– Supports multiple riding modes
Gotrax GXL Series (V1 and V2)
– Popular commuter models
– Bright LED or LCD display
– Two-button control panel
– V2 has improved battery and range
Gotrax XR Series (XR Elite, XR Ultra)
– High-performance scooters
– Full LCD display with speed, battery, and mode info
– Two-button interface
– Often includes Bluetooth (but not required for unit change)
To identify your model, check:
– The sticker on the deck or stem
– The box it came in
– The Gotrax website using your serial number
Once you know your model, you can follow the correct steps below.
Step-by-Step: How to Change Gotrax Scooter from Km to Mph
Now for the main event—changing your scooter’s speed unit. The process is similar across models, but the exact button sequence varies. Below, we’ll cover each major Gotrax model with clear, easy-to-follow instructions.
Gotrax G1: Switching from Km to Mph
The G1 is the simplest model, with only one button. Here’s how to change the unit:
- Turn on the scooter. Press and hold the power button until the LED display lights up. You should see the battery level and possibly a speed reading.
- Wait for the display to stabilize. Give it 3–5 seconds to fully boot up.
- Press and hold the power button again. Keep holding it for about 5 seconds. You’ll notice the display flash or change.
- Watch for the unit change. The speed unit should switch from km/h to mph. If it doesn’t, try releasing and pressing again.
- Test it out. Take a short ride and check the speed display. It should now show mph.
Tip: If the unit doesn’t change, try turning the scooter off completely, waiting 10 seconds, and repeating the steps. Sometimes a full reset helps.
Gotrax G2 and G3: Button Sequence for Unit Change
The G2 and G3 have two buttons: power and mode. Here’s how to use them:
- Power on the scooter. Press the power button once. The display should show battery and speed.
- Press the mode button once. This usually cycles through riding modes (Eco, Normal, Sport).
- Press and hold both buttons. Hold the power and mode buttons together for 3–5 seconds.
- Watch the display. The unit should switch from km/h to mph. You might see a brief flash or change in numbers.
- Release the buttons. The setting should save automatically.
- Confirm with a test ride. Ride slowly and check that the speed is now in mph.
Note: On some G2 models, you may need to press the mode button twice before holding both. If the first attempt doesn’t work, try pressing mode twice, then hold both buttons.
Gotrax G4: LCD Display Unit Switch
The G4 has a sleek LCD screen and a two-button setup. Follow these steps:
- Turn on the scooter. Press the power button. Wait for the full display to load.
- Press the mode button to enter settings. Tap it once—you might see “Mode” or a gear icon.
- Press and hold the power button. Hold it for 5 seconds while the mode button is not pressed.
- Look for the unit toggle. The display should show “km/h” or “mph.” It may flash or change automatically.
- Release the button. The new unit should be saved.
- Test it. Ride and confirm the speed is now in mph.
Pro Tip: If nothing happens, try pressing the mode button twice quickly, then hold the power button. Some G4 units require a double-tap to enter settings mode.
Gotrax GXL (V1 and V2): Changing Units on the Go
The GXL series is one of Gotrax’s most popular. Here’s how to switch units:
- Power on the scooter. Press the power button. Wait for the display to fully light up.
- Press the mode button once. This usually changes the riding mode.
- Press and hold the mode button. Hold it for 5–7 seconds. Don’t press the power button.
- Watch for the unit change. The display should switch from km/h to mph. You might see a brief flash or the numbers reset.
- Release the button. The setting is saved.
- Take a test ride. Confirm the speed is now in mph.
Note: On the GXL V2, some users report needing to press the mode button twice before holding. If the first try fails, try: tap mode, tap mode again, then hold for 5 seconds.
Gotrax XR Series: Advanced Display Unit Change
The XR Elite and XR Ultra have full LCD displays and slightly different controls:
- Turn on the scooter. Press the power button. Wait for the full interface to load.
- Press the mode button to cycle modes. Tap it once or twice until you’re in Normal or Sport mode.
- Press and hold the power button. Hold it for 5 seconds. The display may show a settings menu or flash.
- Look for the unit indicator. It should change from km/h to mph.
- Release the button. The change should save automatically.
- Test the scooter. Ride and confirm the speed is now in mph.
Bonus Tip: Some XR models allow unit changes via the Gotrax app (if Bluetooth is enabled). However, the button method works even without the app.
Troubleshooting: What If the Unit Won’t Change?
Sometimes, despite following the steps correctly, your Gotrax scooter won’t switch from km to mph. Don’t worry—this is common and usually fixable. Here’s what to try:
The Display Doesn’t Respond
– Check the battery. A low battery (below 20%) can cause glitches. Charge the scooter fully and try again.
– Ensure the scooter is fully on. Wait 10–15 seconds after powering on before attempting the button sequence.
– Try a hard reset. Turn the scooter off, wait 30 seconds, then turn it back on and retry.
The Unit Changes But Reverts
– This may be a firmware issue. Some older Gotrax models have bugs that reset settings. Try the button sequence 2–3 times in a row.
– Update via app (if available). For XR and GXL V2 models with Bluetooth, use the Gotrax app to check for firmware updates.
Buttons Feel Stiff or Unresponsive
– Clean the button area. Dust or moisture can interfere. Use a dry cloth to wipe the buttons.
– Press firmly but gently. You don’t need to slam the buttons—just apply steady pressure.
Still Not Working?
– Contact Gotrax support. Visit gotrax.com and use their live chat or support form. Have your model number and serial number ready.
– Check online forums. Communities like Reddit’s r/electricscooters often have user-reported fixes.
Tips for Success
To make the unit change process smooth and reliable, keep these tips in mind:
- Do it on a flat, stable surface. Avoid trying to change settings while riding or on uneven ground.
- Use fresh batteries in the remote (if applicable). Some Gotrax scooters come with a remote—low remote batteries can affect functionality.
- Be patient with the timing. Holding buttons for exactly 3–5 seconds is key. Too short, and it won’t register. Too long, and it might trigger another function.
- Write down your model number. Keep it in your scooter bag or phone notes for quick reference.
- Test immediately after changing. Don’t wait days to check—ride a short distance and confirm the unit is correct.
Confirming the Change Worked
After following the steps, how do you know it worked? Here’s how to verify:
- Take a slow ride. Start at a walking pace and gradually increase speed.
- Watch the display. Look for numbers like 5, 10, or 15—these are common mph speeds.
- Compare to known speeds. If you normally ride at 10 mph, you should see “10” on the display, not “16” (which is 10 mph in km/h).
- Check the unit label. Some displays show “mph” or “km/h” next to the number. Look for that indicator.
If you see mph and the numbers make sense, congratulations—you’ve successfully changed your Gotrax scooter from km to mph!
Final Thoughts
Changing your Gotrax scooter from kilometers to miles per hour is a simple but important step for riders in imperial-measurement countries. It improves safety, clarity, and overall riding experience. While the exact method varies slightly by model, the core process—using the power and mode buttons in a specific sequence—is consistent across most Gotrax scooters.
Remember:
– Know your model
– Power on fully
– Hold buttons for 3–5 seconds
– Test after changing
– Reset if needed
With this guide, you’re equipped to make the switch quickly and confidently. Whether you’re commuting to work, exploring your neighborhood, or just enjoying a weekend ride, seeing your speed in mph will make every journey smoother.
Now go enjoy your ride—safely and in the right units!